en
Select category
Concepción

Equipment SJR for repair of ball joints and steering tips

Equipment SJR for repair of ball joints and steering tips
1 / 3
Equipment SJR for repair of ball joints and steering tips - photo 1 Equipment SJR for repair of ball joints and steering tips - photo 2 Equipment SJR for repair of ball joints and steering tips - photo 3
Renewed: 20 May 2020, 08:09 ID: 22352
$750/piece
Flagma member since 12 March 2018
Стил Александр
менеджер

Description

Equipment SJR for repair of ball joints and steering tips (modification 2) is a guaranteed source of profit for your car service. With it, you can quickly and efficiently restore the suspension, steering device.

The Second modification of device has centering mechanism. This allows one operator to cope with repair steering tip.

When is a steering tip repair required?
Ball joints and steering tips wear out. As a result, the polymer insert located inside is erased. In its place a void forms. The reason for this are:

Excessive loads;
Penetration of dirt;
Movement on roads in poor condition.

The principle of using SJR technologyEquipment SJR
The molten polymer is fed into the interior into the cavity between the ball and the sleeve body through a drilled hole under pressure.
As it freezes, it forms a new, ideal in technical parameters, seal for the lever finger.
The restored unit is able to serve from 15,000 to 25,000 km, depending on the condition of the roads on which the car will ride;
In the event of the effects of new wear, repeated restoration of the ball joints is allowed.
After restoring ball joints and steering tips using SJR technology, car owners note a decrease in lubricant consumption

Benefits of “Modification 2”
Reinforced piston, the pressure of which is already 100 kg / cm2;
Control unit allowing piston movement in both directions;
Innovative centering mechanism. Thanks to him, the master can cope with the repair of the part without outside help.

Package bundle
Extruder;
Control block;
Pyrometer;
Bushings for centering the ball joints: 10 pcs.;
Washers for centering the ball joints: 5 pcs.;
Power cable;
Pneumatic equipment;
Pressure regulator;
Replaceable nozzles: 3 pcs .;
Fastening mechanism;
Centering mechanism;
Consumables polymer: 20 pcs .;
Gas-burner.

The owner of the ad has the most up-to-date information.

Similar ads

4
Production equipment, industrial equipment
Production equipment, industrial equipment
Production equipment, industrial equipment
Production equipment, industrial equipment
Price
2,200/pc DAT
The engineering-design enterprise carries out designing of production of machines under the individual order of the client. We represent the engineering and technical services complex remotely and directly from the departure to the work sites of the customer. We professionally do modeling...
+4 ads
11 Apr 2021
3
Industrial water treatment equipment
Price
Price on request
We offer high-quality equipment for water treatment Litech Aqua TM (produced in Ukraine) Using many years of practical experience, we can solve any task of water purification. We produce the following types of equipment: - Reverse osmosis systems; - Ultrafiltration systems; - Nanofiltration...
+29 ads
11 Nov
2
Purification of glycerin (equipment)
Price
Price on request
Until recently, there were essentially only two types of glycerin on the world market: 1) Raw glycerin 30-80% (dark brown liquid, often with a distinctive odor) - this is crude crude glycerin with a high amount of impurities, including organic origin 2) Food- or pharmaceutical glycerin 95-99% is...
+29 ads
11 Nov
Show more
Works by Flagma since 12 March 2018
Стил Александр
менеджер
See more ads in the category Auto service equipment, other
Contact information
Стил Александр
менеджер
By phone
In messenger
Say, that you found an ad on Flagma
Safety rules: Do not agree to prepayment if you are not sure about the reliability of the user.
Write a message
Select category
×